Important Safety Instructions - Karibu 66601 Instrucciones De Montaje

Thermostat setting
range 40° to 90°C
General:
Dear Customer,Please read these operating instructions carefully be-
fore you connect and usethe sauna stove for the first time to prevent
causing any damage.
Important safety instructions
• T he installation and electrical connection of the sauna equipment and other
electrical equipment may only be carried out by a licensed electrician.
• R efer to the safety actions required by VDE 0100 § 49 DA/6 and VDE
0100 Part 703/11.82 §4. Even if you comply with the required safety
actions it is not possible to rule out the possibility of all accident risks.
• F ollow the safety instructions to the letter to ensure that you can ope-
rate your equipment safely.
• O nly one sauna stove with the appropriate heating capacity may be
installed in the sauna cabin.(See table)
Connection rating
[kW]
9,0
• The unit is not designed for use in public saunas.
• C aution – danger of burns. The housing of the sauna stove and the
stones get very hot.
• I f it is not installed correctly the unit may cause a fire. Read the com-
plete assembly instructions with due care. Pay particular attention to
the dimensions and instructions.
• O nly use sauna stones approved for use in saunas. Insert sauna
stones loosely; if the stones are inserted too tightly there is a danger
of overheating.
• Do not operate the stove without sauna stones.
• Keep children away from the sauna stove. They may suffer burns.
• S eek medical advice about the sauna temperature and how long peo-
ple with medical problems, infants, children, pensioners and handi-
capped people may stay in the sauna.
• D o not allow the sauna stove to be used by people who are under the
influence of medication, alcohol or drugs.
• P our small amounts of liquid on to the stones; if you pour too much
liquid on to them you may suffer scalds. The quantity of liquid on the
6
Karibu_Anleitung_37.468.50.indd 6
stones should not exceed 15 g/m³ of cabin volume.
Time switch setting
• D o not use the sauna to dry items, clothing or laundry. They may catch
range infinitely
fire.
variable from 0 to 4
• Do not place any items on the stove. They may catch fire.
hours.
• D o not place any items, apart from the sauna controller's temperature
sensor, in the convection current of the stove.
• Metal surfaces may rust in a damp, saltwater climate.
• T he stove may generate cracking noises while it is heating up and
while it is operating (metal heating elements and stones expanding)
• S auna equipment and sauna cabins may only be made of suitable, low re-
sin and untreated materials (for example Norway spruce, poplar or linden).
• T he maximum temperature for the wall and ceiling of the sauna cabin
is +140°C.
• O ver time the cabin walls will become darker near the sauna stove
than in the rest of the cabin; this is normal. Complaints about this will
not be accepted.
• T he minimum height of the sauna cabin must be 1.75m (interior height)
• V entilation openings must be provided in every sauna cabin. The ven-
tilation opening must be on the wall directly below the sauna stove
approx. 5-10 cm above floor level. The waste air must be discharged
through an opening diagonally opposite the stove in the rear wall bet-
ween the top and bottom benches. The ventilation openings must not
be sealed. The cabin light and its installation must have a splash-proof
design and be suitable for an ambient temperature of 140°C. Therefo-
re only an approved sauna light with max. 40W may be installed with
the sauna stove.
Installation instructions
Important.
Do not use any floor coverings under the stove if they are made of in-
flammable material such as wood, plastic, etc. Ceramic tiles are ideal
for use in a sauna. The area under the stove may suffer discoloration,
even on non-flammable flooring or joint material. No compensation will
be paid for discoloration or damage to flooring or the sauna walls. The
distance between the rear of the stove and the cabin wall depends on
the design (wall mounting). The stove must be connected to the electri-
city supply before it is mounted on the wall holder.
Installing the sauna stove
• A ffix the feet on the rear wall of the stove the screws supplied (4
Cabin size
screws M5 x 12).
[m³]
• F asten the bottom panel to the inner sheath with 4 self-tapping screws
3.9 x 9.5.
• T hread the mains cable into the terminal box through the hole provi-
ca. 6–14
ded for it.
• A fter making the electrical connection of the mains cable, close the
cover on the terminal box again (with the spacer on the outside).
• P osition the sauna stove in front of the air intake opening. Secure the
wall bracket to the wall of the cabin using the wood screws supplied.
Insert the stone grate (see description entitled "Placing the sauna
stones on the stone grate", section entitled "Cleaning and care").
• F or the installation of the sauna stove ensure that the vertical distance
between the top of the sauna stove and the ceiling of the sauna cabin
is at least 110 cm and the horizontal (lateral) distance between the
stove and the wall of the cabin is at least 7 cm. The distance between
the bottom of the stove and the floor depends on the design of the
stove (adjustable feet). However, it should be ensured that the stove
is not placed on a floor made of highly inflammable material (wood,
plastic flooring, etc.). Ideally ceramic tiles or the like should be used in
the sauna. The distance between the rear wall of the stove and the wall
of the cabin also depends on the design (wall bracket).
• T he distance between the stove safety grille or the bench and other
inflammable materials from the oven must be at least 7 cm. The height
of the safety grille must be equal to the height of the stove at the front.
20.10.17 08:27