Screen Size Selection; Changing The Screen Size - Pioneer PDA-5001 Manual De Instrucciones

Operations

Screen size selection

When this unit is connected to the plasma display
PDP-502MXE, it incorporates screen modes of various
height and width ratios. For optimal viewing, we
recommend that you select the screen mode that best
matches the video source that you are viewing. Although
these modes are designed for full display of a picture on a
wide screen, it is our hope that you make use of them
with a full understanding of the manufacturer's intentions.

Changing the screen size

The size of the picture or the picture's range projected on
the screen can be changed between 5 screen sizes
described in the table on this page.
Press SCREEN SIZE to select the size.
The screen size changes each time SCREEN SIZE on the
remote control, or SIZE on the unit is pressed as follows.
For video signals
3 NATURAL WIDE
CINEMA WIDE 2
For PC signals
3 ORIGINAL
ZOOM 2
During video signal input
How the picture looks
NATURAL WIDE
4:3 NORMAL
FULL
ZOOM
CINEMA WIDE
18
<ARE1351> En
3 4:3 NORMAL
ZOOM 2 FULL 2
3 4:3 NORMAL
FULL 2
Suitable for when viewing news or sports programs. Movies or
sports programs can be viewed with an expansive powerful image.
Suitable for when viewing news or sit coms. The video software
can be viewed in its original screen frame size.
(To prevent screen burn on this unit, the displayed position of the
screen frame will be slightly different each time the power is
turned on.)
Suitable for wide screen images (squeeze).
Mainly suitable for viewing Cinemascope size and other such movie
images.
Provides a more expansive, powerful image.
Mainly suitable for viewing Vista size and other such movie images.
Provides a more expansive, powerful image. This screen size is
convenient when viewing a Cinemascope size image that has
subtitles.
(For screen sizes when the video signal of a personal
computer is input, please refer to the personal computer
input signal correspondence chart in the instruction
manual supplied with the PDP-502MXE.)
Notes
÷ When the NATURAL WIDE, CINEMA WIDE, ZOOM, or FULL
setting is used to display a non-wide screen 4:3 picture fully on
a wide screen, a portion of the picture may be cut off or
appear deformed.
÷ Please note that when this unit is used for business or public
viewing purposes and the CINEMA WIDE mode or ZOOM
screen modes are used to compress or stretch the screen
picture, this may violate the rights of the author protected
under copyright law.
Moving the screen position
upward or downward
When a vista size movie etc., is viewed at the CINEMA
WIDE or ZOOM setting, the image may not be centered
on the screen, and may extend past the edge of the
screen.
In this case, adjust the screen to an clearly viewable
position using 5/∞.
During personal computer input (1280 x 1024/60Hz only),
even when the ZOOM setting is selected, the position of
the screen can be adjusted by using 5/∞.