Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Description and Technical Data
Appliance Description
3.4
Appliance Description
3.4.1
View of the Appliance
Figure 1
1
Push handles
2
Connecting cable with mains plug
3
On/off switch
4
Swivel casters with total lock
3.4.2
Appliance Description
The Powerstapler is made of stainless steel and is executed in self-supporting construction.
Two adjustable and spring-loaded stacking platforms accommodate heat-retaining base parts or clean
porcelain plates or toughened glass. Special springs transport the inserted items towards the top at a con-
stant speed across the entire lift, ensuring that the dispensing height always remains the same.
Ergonomically shaped push handles with an integrated bumper protect against injuries to the hands and
damage to the appliance. Together with the corner bumpers fixed to the lower section they offer optimal col-
lision protection in the direction of travel and guarantee an all-side protection against damage. Push handles
and corner bumpers are made of high-quality, impact-resistant plastic.
An on/off switch with an integrated display function is fitted to the front of the housing. The operating mode
can be easily seen from a distance because of the integrated light. The thermostat is set ex factory.
The appliance is insulated all-around by high-quality special insulation. The insulating plates are non-
flammable, chemically neutral, damp-proof and harmless to health.
Two insulated covers made of stainless steel reliably protect inserted items from drying out, even during ex-
tended temporary storage periods. Covers reduce heat loss upwards and heating time. They are flat and
double-walled and have a holding-down device made of plastic.
91346811_A1
View of the appliance
5
Swivel casters without total lock
6
Corner bumpers
7
Cover
Section 3
Page 13
Powerstapler
PSUH
Capítulos
Tabla de contenido
Solución de problemas
