Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CAUTIONS
Use normal supply
•
of 10A.
• After filling with water, do not tilt unit and avoid moving unit – which may cause water to overflow the
sides of the tank and leak. If unit needs to be moved a little, push on the side gently. (Fig. 5)
• Never turn the unit on its sides. (Fig. 6)
• Do not place any heavy objects on top of the product. The air outlet must not be obstructed. (Fig. 7)
• Keep a minimum space of 6 inches around the unit. (Fig. 8)
• Suitable ambient temperature range is 68~104°F. The body of this product should not be placed in
area with extremely high or low temperature. When ambient temperature is high, change water
frequently to prevent mildew and mold growth.
Filter Handles
XX
(Fig 2)
Cleaning the Dust Filter
1. Disconnect the power supply.
2. Push down on the two handles of the filter and pull outwards. (Fig 2)
3. Clean under lake warm water and mild detergent.
4. Make sure filter is completely dry before operating unit.
Cleaning the Water Curtain
1. Disconnect the power supply.
2. Remove the 3 screws located on the back frame: one in each top corner and one at bottom
center. Do not remove back panel yet.
3. Panel is connected to the unit by a water tube, gently remove end of tube that is connected to the
water pump. (Fig. 3) Remove back panel.
4. Remove water curtain by first removing the bottom rod – push in gently. Then remove from top
rod by separating the Velcro attachment.
P-4
All manuals and user guides at all-guides.com
of AC220V / 50Hz. Plug into dedicated socket with minimum rating current
Water Tube
(Fig3)
X
(Fig 4)
Tabla de contenido
