Bissell 1887 Serie Manual Del Usuario página 11

Operations
*Hard Floor Cleaning (continued)
5. Place tank in to machine base, seating firmly
in base. Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6. Plug into an outlet and turn the power on.
7. Plan your cleaning route to leave an exit path.
Be sure to allow adequate time for floors to dry.
8. While pressing the spray trigger, make one
slow forward wet pass and another back.
Caution: Do Not Overwet.
9. Repeat the motion without pressing the
trigger using the hard floor tool to squeegee and
suction up the dirty water.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer to the
Maintenance section on page 12 for machine
clean up and storage instructions.
WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only
BISSELL cleaning fluids intended for use with the deep cleaner. Non-BISSELL cleaning
solutions may harm the machine and void the warranty.
www.BISSELL.com
11