S F E
2-GENERAL INSTRUCTION
Read this user and maintenance manual carefully before using the device.
The controller must be installed by qualified personnel; the installation
procedures must be carried out with equipment switched off.
E
Package and storage
N
The equipment is packaged in a formed polystyrene frame and contained in a cardboard
G
box. No special procedures are required for unpacking.
L
The equipment should be stored in places having the following features:
- temperature in the range -10°C to +60°C;
I
- relative humidity in the range 30% to 95%.
S
H
Installation
The equipment should be installed and commissioned by specialised personnel in
compliance with the regulations in force in the country of use.
The equipment should be installed in a dry place, not directly exposed to the sun, with
temperatures between -10°C and + 60 °C.
Do not power the equipment with a voltage value other than that indicated in this user and
maintenance manual.
Cleaning
The equipment should be cleaned with a dry cloth.
In the case of hard dirt, disconnect the equipment from the power supply network and use
a damp cloth. At the end of the cleaning, restore the electrical connection.
20