Technical Information
Universal programming unit
Item no.: 4935 200 045 0
Intended use
This programming unit is intended exclusively for use in the setting and commissioning of
Becker tubular drives. Please observe the Assembly and Operating Instructions for the
respective tubular drive. After commissioning, the programming unit must be removed.
For commissioning:
Caution
Electrical connections may only be carried out by a qualified electrician.
Prior to installation, the power supply must be disconnected.
The applicable regulations for electrical installation must be complied
with. The programming unit must be protected from moisture!
Connect the wires of the tubular drive to those of the same colour in the programming
unit.
de
es
Becker-Antriebe GmbH
Friedrich-Ebert-Str. 2-4
35764 Sinn/Germany
www.becker-antriebe.com
Selection buttons
Control buttons
Settings buttons
en
fr
nl
it
cs
tr
5