Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Hoist will not lift or
lower at no load
Free chain mode
does not allow chain
to be pulled freely
Hoist binds
internally while
lifting or lowering
Twisted Chain on
multiple part hoist
All other symptoms
MAN-ALLBADGER-15
hook block tightly against the
hoist frame.
Brake is not set
Lever moves without clicking,
chain does not continue to
move in or out
Chain pulled too fast or
accelerated too quickly
causing the brake to set
Gearing improperly installed
Twisted or kinked chain was
allowed to ingested into the
hoist
Capsized or flipped lower
hook
Unknown
See operating and inspection
There must be some
resistance to cause the lever
to ratchet. Hold or pull the
slack chain by hand while
ratcheting the lever. Or, use
the free chain mode to easily
position the chain.
Reset the hand wheel (27)
and pull load chain with less
force
Requires service for repair.
Remove gear cover and
inspect for proper gear timing
per instruction and illustration
page 39 in this manual.
Requires service for repair by
disassembly to inspect for
damage
Flip Lower hook block
Consult qualified service
- 8 -
AMH© 2019
Tabla de contenido
