Probuilder 17905 Manual De Instrucciones página 51

Changing from circular saw to
cross-cut/mitre saw
Press down the tilting fixture (9), and turn the
workbench (7) around the axle (8) until you
hear a click.
9
Pull the lock button out (17a), and slot it in
the notch. Place the saw head in a vertical
position.
17a
dl
Engage the depth stop (30).
Loosen the wing nut (20) holding the
cleaver blade (18) in place. The cylinder
by the cleaver blade has two slots, so the
cleaver blade can be locked in two different
positions. The cleaver blade must be parallel
to the saw blade, not immediately in line
with it. Tighten the wing nut once the cleaver
blade is in the correct position.
GB
51