Probuilder 17905 Manual De Instrucciones página 50

Push in the safety knob on the handle (19),
to release the moving blade guard (17).
Push the blade guard up fully, and push
the cylinder in, so the cleaver blade is lined
up with the saw blade. Check that there is
sufficient distance between the cleaver blade
and the saw blade!
Press the saw head down, and secure it using
the lock button (17a).
Press down the tilting fixture (9), and turn the
workbench (7) around the axle (8) until you
hear a click.
9
50
17a
Fit the permanent blade guard (27) to the
cleaver blade (18) by pressing the button on
the side of the blade guard.
bt
Fit the mitre guide (26) and parallel guide
(25) on the workbench.
cr
Fit the dust bag (28) to the underside of the
saw, or connect a vacuum cleaner to the saw.
The saw can now be used as a circular saw.
cs
cq