Operating The Appliance; Power On/Start; Power Mode; Temperature Mode - CASO DESIGN Pro S-Line 1800 Manual Del Usuario

5.2

Operating the Appliance

4.1.4 Switching On

4.1.5 Power mode



4.1.6 Temperature mode

caso Pro S-Line 1800
 Insert the power plug into the socket
 If the stovetop temperature of the induction cooker is lower
than 120°F, the display shows „L". When the temperature is
over 120°F, it will display an „H". An acoustic signal sounds.
Now the appliance is in standby mode.
 Place an induction ready pot or pan in the center of the
cooktop.
 Now press the ON/STANDBY switch 1. to turn on the Pro S-
Line 1800. The control lamps "Level" and "Temp" blink and
an acoustic signal sounds.
 Press the function key 4. The preset power stage "8" is
selected and the appliance turns on.
 With the + / - Keys (5+6), you can change the settings at any
time in a range from 1 – 12.
PLEASE NOTE
► We recommend selecting the function "Power Mode" in case
of steaming food or boiling water for example. So the
overheating protection "E05" will not be activated.
 Press the Function Key 3. to select the temperature. The
preset temperature stage "180°F" is selected and the
appliance turns on.
 With the + / - keys, you can change the setting at any time in
a range from 140 – 460°F. (Temperature stages: 140, 160,
180, 200, 220, 250, 280, 310, 340, 380, 420 and 460°F).
 Please note that the two functions of level and temperature
can be chosen as an alternative. You can either work with
the power levels or with the temperature stages. The most
recently selected function is active.
 The temperature is measured by a sensor underneath the
glass ceramic plate, therefore the displayed temperature can
deviate from the temperature in the pot. We recommend
starting with a power setting first and after the temperature of
the plate has normalized (3 to 4 minutes), you can switch to
temperature control.
24