Elvox RS16 Manual Para El Conexionado Y El Uso página 17

ACTO
4.1 - Power supply line wiring: take the cover off the board by unscrewing the screw V and connect the power supply line
1= neutral
2= earth wire
3= live
The control unit can be powered at from 120 Vac to 230 Vac 50-60 Hz
4.2 - Wiring for flashing light, gate movement warning light and accessories power supply.
+ - Terminals + - + Description
4-5 Warning light output
5-6 Output for flashing light
7-8 Accessories power supply output
Input description table:
9 10 11 12 13 14
Fig. 6
EN
Fig. 4a
+ - +
+ + +
- -
+ - + - +
Power supply output for
accessories (max 300 mA)
24 Vdc 10 W
24 Vdc 120 mA max
gate movement
9
9 10 11 12
warning light
Function
Output 24 V dc maximum load 120 mA, on with a steady light when moving and off when the gate is
closed, with dip-switch number 8 on used for the phototest function (4 = +24 V dc / 5 = GND)
9 10 11
Output 24 V dc maximum load 10 W for flashing light (5 = GND, 6 = + 24 V dc) when the gate is open
the flashing light remains on for 3 seconds if the automatic closing function is active
Output 24 V dc maximum 300 mA for supplying the photocells and accessories (7= GND / 8 = +24 V dc)
Terminal number Description
Sequential control input, for controlling
9
the complete travel of the gate
Sequential control input, for controlling
10
the pedestrian travel of the gate, opens 1.5 metres
11 Photocell input, active during closing
Input for edges or internal photocell, active during
12
gate closing and opening
13 Input for stopping the gate
14 Common inputs
- +
10 11 12 13 14
13 14
12 13 14
230 Vac - 120 Vac
1
2
3
Fig. 4b
Fig. 5
Input type
Normally open
Normally open
Normally closed
Normally closed
Normally closed
-
15