Beuchat 7L Instrucciones De Utilizacion página 12

10 > Instruction for use / Use
- Have the tank recharged as soon as possible.
- Place the equipment in its case and store it in a dry
place.
3 - Suggestions for use and maintenance :
- To ensure that the regulator operates at its peak level,
the air delivery must meet the requirements for brea-
thable air, in compliance with the EN 12021 standard.
- When not absolutely necessary, do not leave the equip-
ment exposed to direct sunlight.
- Do not use the regulator first stage as a carrying handle.
- After use, promptly remove the regulator from the tank
to protect it from any shocks.
- Carry and store the equipment in its special case.
- Regularly check the air pressure in the tank.
- Only proper use and regular maintenance can ensure
that the "Boat Diving System" will operate optimally.
Therefore, it is compulsory to have the regulator and the
tank checked every year by a Beuchat agent.
- The tank must be checked every year by a specialised
technician (visual inspection technician).
- The tank must be tested periodically in compliance with
the applicable national regulations (in France, every two
years).
Information about the tank :
Material: steel
Capacity: 2 liters
Operating pressure: 232 bars
Protection: hot metallising / 1 coat of primer / 2 coats of
polyurethane paint
Valves: - M25x2 threaded connection assembly, in
compliance with EN 144-1 regulations
1 "DIN" outlet port, in compliance with EN 144-2 regula-
tions
Important recommendations :
Never leave the tank empty with the valve open.
Never empty the tank quickly, in order to prevent the for-
mation of frost on the valves or significant condensation
inside the tank itself.
Avoid shocks strong enough to make the paint peel off.
Avoid over-exposure to direct sunlight or storage in an
overheated vehicle.