Beuchat 7L Instrucciones De Utilizacion página 11

IMPORTANT RECOMMENDATIONS
CAUTION :
• TO USE THIS UNIT IN COMPLETE SAFETY, YOU
MUST HAVE COMPLETED A TRAINING COURSE SPE-
CIFIC TO SCUBA DIVING AND TO THE USE OF THE
RELATED EQUIPMENT.
• COMPLEMENT YOUR BOAT DIVING KIT WITH A
PAIR OF FINS AND A DIVING KNIFE, AS WELL AS A
MASK AND A SNORKEL (WHEN NOT INCLUDED IN
THE VERSION YOU HAVE PURCHASED).
CAUTION :
• YOU ARE ADVISED TO WEAR A WETSUIT THAT IS
SUITABLE TO THE TEMPERATURE OF THE WATER.
• AN ADEQUATE WEIGHT HOLDER MUST BE ATTA-
CHED TO THE WAISTBAND OF THE HARNESS.
• PROTECTIVE GLOVES ARE RECOMMENDED FOR
ANY TYPE OF OPERATION.
WARNING : BEFORE CONDUCTING ANY UNDERWA-
TER OPERATION FOR HULL INSPECTION, SHUT THE
MOTOR(S) OFF.
Use / Instruction for use > 9
2 - Use
Before every dive :
- Fix the tank on the harness and check it is correctly atta-
ched.
- Remove the protective cap, and then mount the regula-
tor on the tank valve and tighten the handwheel. Do not
over-tighten.
- Open the tank valve completely, then check the tank
pressure using the pressure gauge.
- Check that the regulator is operating properly by hol-
ding down the central button for a few seconds.
- Put the harness on, adjusting it with the suspenders and
the crotch strap.
After every dive :
- Rinse the unit with fresh water.
- Close the tank valves.
- Remove any air left in the regulator by deaerating the
second stage (press the central button).
- Desinstall the regulator by unscrewing the handwheel.
Place the protective cap back.
- Allow to dry in the shade.