Maintenance For Dedust Parts - Gree GCF220BKNA Manual Del Usuario

Maintenance for Dedust Parts

When the cleaning indicator light
Maintenance standard
is on or there's dirt
Maintenance method Wash with water, and wipe
Open the panel, take out the dedusting parts and remove the negative plate which
need cleaning
Hold the handle, pull outward and lift, to remove
●
the static dedusting parts
Content
1.Remove the negative plate
from the dust collector assy.
2.collect the surface dust with
dust-collecter.
3.Dip in the water for 1hours.
4. Wipe the dirt with cloth or soft
brush. Please wear cleaning
gloves.
5.Wash with water
6.Place it at ventilated and shady
spot and dry out.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
1. Please wear rubber gloves when wiping and cleaning.
2. Do not break the tungsten fi lament during disassembly
and cleaning.
Remove the screws to remove the
●
negative plate.
Wear rubbish gloves
Dust collecto
See P18
18
Notice
Hold both sides to
easily remove the
plate.
Negative plate
See P18
①
dedusting rack
(please use it
after dipping and
before drying
out)
● Please
wipe out the
dirt on plastic
component with
soft cloth
Wipe with cotton
stick for the spot
which is not
available with
fi ngers.
● Do not leave
the fi bre of
cloth on the
component.
Incorrect
reaction might
be caused.
Notice
static