Yearly Dealer Maintenance; Long Term Storage - Holmatro XR 4360 Manual

• Check the attachment of the carrying handle. If necessary, fasten it firmly by tightening the bolts.
• Check the operation of the locking mechanisms for the mechanical plunger and for the rotating
handle.
8.4.9 Deadman's handle
• Check whether the deadman's handle returns to the neutral position.
• Check the operation of the deadman's handle. Have a Holmatro Certified Technician repair the
deadman's handle if it does not function properly.
8.5

Yearly dealer maintenance

We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.6

Long term storage

• Close the spreading arms and leave them slightly opened so that the tool can be stored without
pressure.
• Apply a thin coat of preservative to the external steel parts.
• Store the tool in a dry and well-ventilated area.
9 Decommissioning/Recycling
At the end of its service life the equipment can be scrapped and recycled.
• Make sure that the equipment is put out of order to avoid any use.
• Check that the equipment does not contain any pressurized components.
• Recycle the various materials used in the equipment such as steel, aluminium, NBR (Nitrile
Butadiene Rubber) and plastic.
• Collect all dangerous substances separately and dispose of them in an environmentally responsible
way.
• Consult the Holmatro dealer about recycling.
XR4360 (C) 916.000.966_006
EN
39