Isinfections; Ecycle Batteries; Uthorized Repair Service - AngelSounds JPD-100S (mini) Instrucciones

CAUTION: To prevent damage to equipment, do not clean any
part of the Product or Accessories with phenolic compounds. Do
not use abrasive or flammable cleaning agents. Do not steam,
autoclave, or gas-sterilize the Product or accessories.
CAUTION: Cleaning liquids: Do not submerge the device in
liquids or pour cleaning liquids over, into or onto the device.
.
* Don't use strong solvent, for example, acetone.
* Never use an abrasive such as steel wool or metal polish.
* Do not allow any liquid to enter the product, and do not immerse any
parts of the device into and liquids.
* Avoid pouring liquids on the device while cleaning.
* Don't remain any cleaning solution on the surface of the device.
Wipe the surface of sensor of transducer with 70% ethanol or alcohol,
self-air dry or clean with a clean, dry cloth.
6.4 Disinfections
Cleaning the unit surface and the transducer as the above mentioned,
then wipe the surface of transducer with 70% ethanol or alcohol, clean
the transducer surface with a dry, soft cloth.
* Don't use low temperature steam sterilization or other way to sterilize
* Don't use high temperature sterilizing process
6.5 Recycle Batteries
The battery is recyclable. Remove the old battery from the Product and
follow your local recycling guidelines or Refer to local regulations.
WARNING: Irregular treatment of batteries may be result in
hazards to health and environment.
6.6 Authorized Repair Service
The Product has no user-serviceable internal components. Try to
resolve any maintenance issues with the Product by using the
Troubleshooting Table presented in this chapter. If you are unable to
resolve the problem, contact Jumper Medical Equipment Co., Limited
Service.
15