Sub-Zero PRO Serie Guía De Instalación Y Especificaciones página 12

IN S TA L L AT I O N
Alignment
D OO R A DJ US T ME NT
The doors are adjustable in and out, up and down, and side
to side. In-and-out and up-and-down adjustments are made
on the door. Side-to-side adjustments are made on the
cabinet hinges. To make any adjustments, remove the door
and hinge pins. Refer to the illustration below.
In-and-Out and Up-and-Down Adjustment:
Place the door on a protected work surface, then loosen
1
the two upper hinge mounting screws.
Remove the two lower hinge mounting screws, then
2
remove the lower hinge.
Remove the positioning screw from the bottom of the
3
door, then use the adjustment pin to make up-and-down
and in-and-out adjustments. Refer to the illustration
below. Each vertical hole location adjusts the door
. The slotted holes allow for in-and-out adjustment.
(1)
Once the adjustments are made, install and tighten the
4
positioning screw.
HINGE
PIN
Door removal
12 | Sub-Zero Customer Care 800.222.7820
1 / "
32
POSITIONING
SCREW
DOOR HINGE
ADJUSTMENT
PIN
Door adjustment
Side-to-Side Adjustment:
Loosen the two mounting screws on the upper and/or
1
lower cabinet hinge. Refer to the illustration below.
Use the Allen wrench provided to rotate the adjustment
2
screw.
Verify the hinge is parallel to the side of the unit, then
3
tighten the mounting screws.
Install the hinge pins and door, then verify the door
4
alignment.
HINGE
SCREW
ADJUSTMENT
SCREW
Cabinet hinge adjustment