Rotary ARO14 Instrucciones De Instalación página 8

STANDARD
Minimum Floor Thick-
ness
Anchor
Minimum Concrete
Strength
Minimum Anchor Em-
bedment
Minimum Distance to
Concrete Edge, Crack,
Expansion Joint, Aban-
danoned Anchor Hole
*The supplied concrete fasteners meet the criteria of the American National Standard
"Automotive Lifts - Safety Requirements for Construction, Testing, and Validation" ANSI/ALI ALCTV-2011, and the lift
owner is responsible for all charges related to any additional anchoring requirements as specified by local codes.
STANDARD
Minimum Floor Thick-
ness
Anchor
Minimum Concrete
Strength
Minimum Anchor Em-
bedment
Minimum Distance to
Concrete Edge, Crack,
Expansion Joint, Aban-
danoned Anchor Hole
*The supplied concrete fasteners meet the criteria of the American National Standard
"Automotive Lifts - Safety Requirements for Construction, Testing, and Validation" ANSI/ALI ALCTV-2011, and the lift
owner is responsible for all charges related to any additional anchoring requirements as specified by local codes.
CONCRETE AND 3/4" ANCHORING REQUIREMENTS
ANSI/ALI
ALCTV:2006
4-1/4 INCHES 5 INCHES
Hilti Kwik Bolt III* Hilti HIT-HY
3/4" x 5-1/2" 150MAX-SD
Adhesive; Hilti
HIT-HY 150 MAX
Adhesive; HILTI
HIT-RE 500-SD
Adhesive
3000 PSI 3000 PSI
3-1/4 INCHES 3-1/2 INCHES
4-1/2 INCHES 5-1/4 INCHES
Contact customer service for further information at: 800.445.5438
CONCRETE AND 5/8" ANCHORING REQUIREMENTS
ANSI/ALI
ALCTV:2006
4-1/4 INCHES 4-3/8 INCHES
Hilti Kwik Bolt III* Hilti HIT-HY
5/8" x 4-1/4" 150MAX-SD
Adhesive; Hilti
HIT-HY 150 MAX
Adhesive; HILTI
HIT-RE 500-SD
Adhesive
3000 PSI 3000 PSI
2-3/4 INCHES 3-1/8 INCHES
4-1/2 INCHES 3-1/8 INCHES
Contact customer service for further information at: 800.445.5438
IBC 2006, 2009, 2012
6 INCHES
Hilti Kwik Bolt III
3/4" x 7"
3000 PSI
3-3/4 INCHES
3-1/4 INCHES
IBC 2006, 2009,2012
5 INCHES
Hilti Kwik Bolt III
5/8" x 6"
3000 PSI
3-1/8 INCHES
2-1/4 INCHES
8
SEISMIC
Varies by location consult
with your structural engineer
and manufacturer's repre-
sentative.
SEISMIC
Varies by location consult
with your structural engineer
and manufacturer's repre-
sentative.