Samsung POWERbot SR2AK9350W Serie Manual Del Usuario página 33

Symptom
I have installed the
Smartthings App, but
the PoWeRbot fails to be
connected.
I fail to log into the Samsung
account.
there appears a message
saying there is a failure
during easy-Setup.
the products do not work
even though the smartphone
is normally connected to the
PoWeRbot.
the functions of the
Smartthings App do not
work.
the Smartthings Robot
Vacuum App fails to get
started.
PoWeRbot is not connected
to Wi-Fi.
Location recognizing
function does not operate.
fYou can use the product after connecting the wireless router and the
POWERbot through Easy-Setup according to the procedure.
fCheck your ID and password on the screen of the Samsung account.
fYou may have failed temporarily due to the distance from the wireless
router or other obstacles. Please try again after a while.
fTurn off the SmartThings App and then run it again, or disconnect the
smartphone from the wireless router and then connect it again. Or turn
off the power supply of the POWERbot, turn it on, wait for a minute or
longer, and then run the SmartThings App again.
fCheck if the Smart control blocking function of the POWERbot is set.
(When the Smart control is locked, the Wi-Fi indicator is turned off.)
fCheck if the POWERbot is connected to the wireless router.
fCheck the setting status of the wireless router.
fOperate the POWERbot again near the area where it stopped previously.
fIf the POWERbot does not recognize the surrounding environment
or starts the cleaning at the area more than 4 ft (1 m) around where it
stopped, the searching may be difficult.
ENGLISH-33
checklist