Self-Diagnostics SD-TE 220 El Manual Del Propietario página 25

Electromagnetic Compatibility
Information
Table 2
Guidance and declaration of manufacturer-electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below. The
customer or the user of the device should assure that it is used in such an environment.
IMMUNITY test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrostatic
transient/burst
IEC 61000-4-4
Surge ± 1 kV differential mode
IEC 61000-4-5
<5% UT (>95% dip in UT)
Voltage dips, short
40% UT (60% dip in UT)
interruptions and
voltage variations
on power supply
70% UT (30% dip in UT)
input lines
IEC 61000-4-11
<5% UT (>95% dip in UT)
Power frequency
(50/60 Hz) magnetic
field IEC 61000-4-8
www.self-diagnostics.com
IEC 60601 test level
± 6 kV
contact
± 8 kV air
± 2 kV for
power supply lines
± 1 kV for
input/output lines
± 2 kV common mode
for 0.5 cycle
for 5 cycle
for 25 cycle
for 5 sec
3 A/m
Compliance Electromagnetic
level environmentguidance
Floors should be wood, con-
± 6 kV crete or ceramic tile. If floors
contact are covered with synthetic
± 8 kV air material, the relative humidi-
ty should be at least 30%.
N/A
N/A
Power frequency magnetic
fields should be at levels cha-
3 A/m racteristic of a typical locati-
on in a typical commercial or
hospital environment.
EN
25