Safety guidelines
6.7 Service and storage
Caution: Before every service, cleaning
and storage stop the engine and remove
the spark plug cap.
Take care that all screw connections are
tightened.
Never store the mower with gasoline in fuel
tank in a building where gasoline vapours may
come in contact with open fires or where sparks
could ignite fumes.
The fuel tank should be emptied outdoors. Use
suitable containers for draining gasoline.
Let the engine run until the gasoline remaining
in the carburettor is depleted.
Let the engine cool off prior to storage in an
enclosed area.
To avoid danger of fire, clean grass, leaves or
escaping grease (oil) off engine, muffler and
fuel tank.
On a regular basis, check the grass catching
device and check the ejection shield for wear
and tear and sound operation.
For safety reasons, replace worn or damaged
parts.
Always wear protective gloves when working
near the cutting device's vicinity.
Servicing and repairs are only to be conducted
when engine is turned off and when spark plug
cap is removed.
For warranty purposes and safety reasons only
SOLO replacement parts should be used.
Ensure that the tank is fully drained before any
maintenance, assembly, disassembly or
modification.
ENGLISH 8
Maintenance and repair
Maintenance and repair of modern motorized
devices, as well as their safety-relevant
assemblies, require qualified, specialized training
and a workshop equipped with special tools and
test devices.
Thus SOLO recommends that you have a
specialized SOLO workshop carry out all work that
is not described in these operating instructions.
Your SOLO specialist has the required training,
experience, and equipment at his disposal to
provide you with the most cost-effective solution
and can help you in many ways with advice and
service.
Replacement parts
Dependable operation and the safety of your
device also depend on the quality of the
replacement parts that you use. Use only original
SOLO replacement parts. Only original parts come
from the production of the device and thus
guarantee the highest possible material quality,
dimensional accuracy, function, and safety.
Original replacement parts and accessory parts are
available from your dealer. He also maintains the
requisite replacement part lists to determine the
required replacement part numbers, and he is
constantly provided with information concerning
detail improvements and innovations in the
replacement part offering. Please note as well that
guarantee performances from SOLO are not
possible if parts other than SOLO original parts are
used.
In conformance with the product liability law we
want to clearly point out that we are not liable for
any damages which may occur due to improper
handling, or repair. Furthermore, we are not
responsible for any damage that may occur if
replacement parts other than SOLO replacement
parts, or parts that were not authorized by SOLO,
have been used. In addition we are not liable for
any damage that may occur if repair work was
performed by any source other than the Customer
Service or an authorized Service Center. This
liability exclusion applies also to accessories and
supplemental parts.