Analysis Mode Settings - Adixen H2000 PLUS 5.0 Manual Del Usuario

Analysis Mode Settings

Select the main menu Analysis Mode
Settings as described on page 12.
1. Press Enter.
2. Select:
Leak Alarm Level
Leak Rate Unit
Min. Presentation Time
Leak Alarm Indications or
Lowest Frequency
3. Press Enter.
4. Adjust the desired parameter using the
+ and – buttons.
(5. Press Undo to delete the setting and
revert to the previous value.)
6. Press Save to save the set value. The
value will flash to confirm the setting.
Revert to Detection Mode/Analysis
Mode/Combined Mode by pressing
Esc twice.
Esc
Esc
Undo
5
Adixen Scandinavia - User's manual H2000 PLUS
Analysis Mode Settings
< > Enter
1
Analysis Mode Settings
Leak Alarm Level
1.00E+01
< > Enter
2 3
Analysis Mode Settings
Leak Alarm Level
Set Leak Alarm Level
1 .00E+01
+ – Save
6
4
GB
1