Wire Sizing & Gland Sizing - Kasco 8400EJF Manual Del Propietário

For seasonal removal, your quick disconnect includes
an optional water tight cover. Simply separate the
quick disconnect and insert the sealing cover into the
large blue nut half and tighten fi rmly.
Strain Relief
The Strain Relief must be installed to protect the
Quick Disconnect from damage due to excessive
strain. The Strain Relief should be installed on the
user supplied cord length (not on the Kasco supplied
stub cord). It should be position about 15cm from the
Quick Disconnect. To install, insert the narrow end of
the elongated clamp with the chain connected into the
wide end of the short clamp. Use a rubber mallet to
tap the two pieces together securely. A Nylon Tie can
be used to keep it attached to the cord. The chain can
then be attached to the fl oat.
Wire Sizing & Gland Sizing
The chart below shows the proper Gland to be used
with different cord sizes. The measurements are based
on the Outside Diameter (O.D.) of the cord. Smooth,
round cords should be used.
Kasco Quick Disconnect 50 Hz Size Chart:
Gland
Grey
White
Black
Yellow
Kasco 50 Hz Equipment Wire Size Chart
Model
10m
8400EJF 1.5mm
3.1EVFX 1.5mm
3.1EJF
1.5mm
4
O.D. of Cord
7-9mm
9-11mm
11-13mm
13-15mm
Cord Length
30m 60m
2 2
4mm 4mm
2 2
4mm 6mm
2 2
4mm
6mm
8400EJF, 3.1EJF, & 3.1EVFX Fountain
INCLUDED
A. Aerating Fountain (Unit with stub cord) (1)
B. Float in separate box (1)
1. Float Section (3)
2. Top Float Bracket (3)
3. Bottom Float Bracket w/ 50' rope (3)
4. 9" x 3/8" Black Coated Bolt (6)
5. 3/8" Lock Nut (6)
6. Unit Mounting Bracket (3) (not in
cluded with 3.1EVFX)
7. 1/4" x 3/4" Bolt (9)
8. 1/4" Lock Washer (12)
9. Bottom Screen (1)
10. Top Screen (1)
11. Top Screen Clip (3)
12. 1/4" Nut (6)
13. Bottom Screen Clips (3)
14. 1/4-20 x 3/4" Brass Screw (3)
C. Set of Five Interchangeable Nozzles (5)
1. #6 x 1/2" Phillip Pan Head Self Tapping
Screw (3)
2. 3/8" x 4" bolt (1)
3. Linden Nozzle (1)
4. Redwood Nozzle Y Insert (comes installed
in #7)(1)
5. Juniper Nozzle (1)
6. Willow Nozzle (1)
7. Redwood & Spruce Nozzle (1)
8. Sequoia Nozzle
9. 3/8" x 2.5" Bolt (1)
2
2
2
Parts
(3.1EJF only)
(3.1EJF only)