Astralpool GEL-MF 30 Manual De Uso E Instalación página 48

D. SUBSTITUTION OF OPTICAL CONTROL OF LEVEL OF ICE
1. Take out the upper /frontal panel in models MF 22, MF 30, MF 41 Y MF 51
and take out the frontal/ back panel in model MF 61.
2. Look for in the back side of the electric box the optical control conexión of
level of ice with 4 plugs of white colour and disengage it from its place making
prise with rubber anchored tab.
3. Take out the two electric eyes of its light port take them out of the drills
located in the two opposite side of the outlet discharge hole, making pressure
in the external part of the rubber elements, take attention so as not to
damage the sensible side (infrared reader)
4.To install again the optical control of ice level follow this instructions on the
other way round.
E. SUBSTITUTION OF CORRECT SENSOR OF ROTATION IN THE
MOTOR (HALL EFFECT)
1.Take out upper/frontal and side/back panel in models MF22, MF30, MF41
and MF51, while in model MF61 take out the left side/upper panel..
2. Unscrew the screws that fix the plastic lid in the place of the magnetic
sensor and take it out.
3. Unscrew the two screws that fix the sensor in the plastic space and take it
out.
4. Look for in the back side of the electric box the connection of the rotation
sensor of 4 red plugs and disengage of its place making prise with the
anchored tab.
5. To install again the sensor of correct rotation of the motor follow this
instructions on the other way round.
F. SUBSTITUTION OF SENSOR OF WATER LEVEL IN THE TANK
1. Take out the frontal/upper panel.
2. Unscrew the anchore nuts from the connection of cables of both stainless
steel bars –sensor of level of water-located in the float tank.
3. Look for in the back side of the electric box the connection of the sensor of
level of water from two red plugs and disengage it from its place making prise
with the anchored tab.
4. To install the new sensor of level of water follow this instructions on the
other way round.
G. SUBSTITUTION OF THE ELECTRONIC BOARD
1. Take out the frontal/upper panel.
2.Look for in the back side of the electric box the connections of the sensors
and disengage them of its location making prise with the anchored tab.
3. Disengage from the back side of the electronic board the terminal of the
electrical connections, after that take out the electronic board unscrewing the
4 screws that fix it to the plastic electric box.
4. To install the new electronic board follow this instructions on the other way
round.
H. SUBSTITUTION OF THE ICE DISCHARGE HOLE
1. Unscrew the nuts and take out the upper/frontal panel.
2. Take out hte nut and the cutting edge of the ice discharge taking attention
of not to damage the electronic eyes.
3. Slacken the two brackets that fix the polystyrene insulater in the upper part
of the evaportor and take out the two parts of the insulator.
15