Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND SERVICE INSTRUCTIONS FOR MODEL 151XST STROBE LIGHT
FOR USE IN HARSH ENVIRONMENTS/HAZARDOUS LOCATIONS
SAFETY MESSAGE TO INSTALLERS, USERS AND MAINTENANCE PERSONNEL
It is important to follow all instructions shipped with this product. This device is to be installed by a
trained electrician who is thoroughly familiar with and will follow all applicable national and local
codes in the country of use.
The selection of the mounting location for the device, its controls and the routing of the wiring is to
be accomplished under the direction of the facilities engineer and the safety engineer. In addition,
listed below are some other important safety instructions and precautions you should follow:
•
Read and understand all instructions before installing or operating this equipment.
•
Never alter the unit in any manner. Safety in hazardous locations may be endangered if ad-
ditional openings or other alterations are made to units specifically designed for use in these
locations.
•
Do not connect this light to the system when power is on.
•
After installation, ensure that the set screw is properly tightened and that threaded joints are
fully engaged.
•
After installation, test the light system to ensure that it is operating properly.
•
After testing is complete, provide a copy of this instruction sheet to all operating personnel.
•
Establish a procedure to routinely check the light installation for integrity and proper operation.
Failure to follow all safety precautions and instructions may result in property damage, serious
injury, or death to you or others.
I. GENERAL.
The Model 151XST Strobe Lights are visual signals intend for use in Hazardous and Marine
Locations for use in Indoor/Outdoor and Outside Type (Saltwater) applications. Underwriters
Laboratories has investigated the Model 151XST to ensure it complies with the TYPE 4X (wa-
tertight and corrosion resistant) and IP66 (dust-tight and protection against heavy seas) enclosure
requirements.
The Model 151XST is available in 12-24 VDC, 120 VAC at 50/60 HZ and 230-240 VAC at 50/60 HZ.
II. INSTALLATION.
A. Unpacking.
Damaged globes can lead to explosions which could result in serious injury or death.
After unpacking the Model 151XST, examine it for damage that may have occurred in transit. If
the equipment has been damaged, do not attempt to install or operate it, file a claim immediately
with the carrier stating the extent of the damage. Carefully check all envelopes, shipping labels
and tags before removing or destroying them.
-1-
Tabla de contenido
