Safety; Stay Alert; Safety Labels; Important - Swisher E4-U3000 Manual Del Usaurio

Safety

Work Safely
This machine operates at very high
speeds and has the potential to do serious
damage if misused, abused or mishandled.
To reduce the risk of injury, you must
maintain control at all times, and observe
all safety precautions during operation.
Never permit a person without training or
instruction to operate this machine!
ALWAYS wear eye protection to shield
against thrown objects.
ALWAYS wear hearing protection
devices when operating this unit.
NEVER operate the engine when trans-
porting the unit. Make sure cutter safety
guards are in place when transporting
this unit.
NEVER operate the engine indoors!
Make sure there is always good venti-
lation. Fumes from engine exhaust can
cause serious injury or death.
ALWAYS make sure there are no miss-
ing or loose fasteners and that the stop
switch and throttle controls are working
properly.

Safety labels

Stay Alert

You must be physically and mentally fit to
operate this unit safely.
WARNING!
Never operate
power equipment of any
kind if you are tired or if you are under
the influence of alcohol, drugs, medica-
tion or any other substance that could
affect your ability or judgement.
WARNING!
Use Good Judgement
ALWAYS clear your work area of trash or
hidden debris that could be thrown back
at you or toward a bystander.
ALWAYS use the proper cutting tool for
the job.
ALWAYS make sure the cutting attach-
ment tool is properly installed and firmly
tightened before operation.
NEVER use a cracked or warped cutting
attachment: replace it with a serviceable
one and make sure it fits properly.
ALWAYS stop the engine immediately
if it suddenly begins to vibrate or shake.
Inspect for broken, missing or improperly
installed parts or attachments.
NEVER extend trimming line beyond the
length specified for your unit.
Safety and Operation Information Labels: Make sure all informa-
tion labels are undamaged and readable. Immediately replace
damaged or missing information labels. New labels are available,
Contact Swisher Inc. at (800) 222-8183, or go to www.swisherinc.com
for assistance. You may also contact Swisher at the address printed on
the back of this Manual.
WARNING!
Never make unauthorized
attachment installations. Do not use
attachments not approved by Swisher
for use on this unit.
ALWAYS keep the unit as clean as prac-
tical. Keep it free of loose vegetation,
mud, etc.
ALWAYS hold the unit firmly with both
hands when cutting or trimming, and
maintain control at all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug wire
before performing any maintenance work.
BEFORE starting the engine make sure
the cutting attachment is not contacting
anything.
ALWAYS stop the engine immediately
and check for damage if you strike a for-
eign object or if the unit becomes tan-
gled. Do not operate with broken or dam-
aged equipment.
This label indicates the minimum distance between
front handle and rear grip per ANSI B175.3.

IMPORTANT!

3