Technical Information; Warranty Conditions - Fanaway EVO1 LED Manual De Instrucciones

Fanaway EVO1 LED Installation Instructions
CARE AND CLEANING
1) Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to
avoid scratching the paint finish. Please turn off electricity power when you do so.
2) Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the
possibility of an electrical shock.
3) The motor has a permanently lubricated ball bearing so there is no need to oil.
NOTE: Always turn off the power and disconnect the female plug 1 and male plug 1 before attempting to clean your
fan.
FAN models
FANAWAY LED FAN
IN AUSTRALIA / NEW ZEALAND – Please refer to the separate WARRANTY STATEMENT.
IN EUROPE – If you are a European customer please contact the retail outlet where the fan was purchased for a
warranty service.
9 | P a g e

TECHNICAL INFORMATION

Rated Voltage Rated power (motor)
220-240VAC

WARRANTY CONDITIONS

Light power
3000K/5000K/4000K
60W
LED driver model:
KLC-038-A2M
40W,
V 1 . 0