GE PFMS1NFX Manual De Uso página 69

REMOVING THE FREEZER DRAWER
The freezer drawer can be removed, if needed,
to fit through tight areas.
Read these instructions completely and carefully.
REMOVE THE BASKET
1
A Open the freezer drawer until it stops.
B
Cut the 2 wire ties off of the basket with
wire cutters.
C The freezer basket rests inside 4 tabs on
the freezer slides. Lift the basket up and
out of the 4 tabs.
D Tilt the front up and lift the entire basket
up and out of the drawer.
REMOVE THE DRAWER FRONT
2
FROM THE SLIDES
A Remove the 10 hex head screws from the
door and remove the door.
DO NOT remove the torx screws
from the rail assemblies.
DO NOT remove
torx screws
Rail Assembly
B Set the drawer front on a non-scratching
surface.
C Push the rail assemblies back into the
cabinet.
Installation Instructions
A
69
(on some models)
REMOVE THE BASE GRILLE
3
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still
not fit through a doorway, the base grille
can be removed.
A
Remove the base grille by removing the
2 Phillips head screws.