GE PFMS1NFX Manual De Uso página 66

INSTALLING THE REFRIGERATOR
REMOVE THE FRESH FOOD
6
DOOR HANDLE
(For placement in the installation location or
reversal of the handles – on some models)
Stainless steel (on some models):
REMOVING
A
THE DOOR
HANDLE: Loosen
the set screws
with the 3/32ʺ
Allen wrench
and remove
the handle. NOTE:
For Double Door
models follow the
same procedure
on the opposite
door.
Plastic handle (on some models):
REMOVING THE DOOR HANDLE: Depress the
A
tab on the underside of the handle and slide
the handle up and off of the mounting
fasteners.
REVERSING
THE DOOR
HANDLE (on
some models):
• Remove
the handle
mounting
fasteners with
a 1/4ʺ Allen
wrench and
transfer the
handle
mounting
fasteners to
the right side.
• Remove the
logo badge.
• Remove and transfer the plug button to
the left side of the fresh food door. NOTE:
Use a flat plastic edge to prevent damaging
the door. Remove any adhesive on the door
with a mild detergent. Remove the paper
covering on the adhesive backing on the logo
badge prior to carefully attaching the badge
to the door.
Installation Instructions
A
B
Mounting
Fasteners
(appearance may vary)
B
A
Mounting
Fasteners
(appearance may vary)
(cont.)
REMOVE THE FREEZER DOOR
7
HANDLE
Stainless steel and plastic handles:
Loosen the set screws located on the underside
A
of the handle with a 1/8ʺ or 3/32ʺ Allen wrench
and remove the handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4ʺ Allen wrench.
Badge
Badge
66
A