Using The Cable Clips - Lorex LIVE SD 4.3 Serie Guía Para Usuarios

Using the Cable Clips

Option 1
Thread the extra cable through the cable clip notches.
Option 2
Thread the extra cable through the cable clip notches.
Wrap the excess cable around the clip.
Option 3
Wrap the excess cable around the clip.
Tips
• It is recommended to charge the battery for 6 hours
before use.
• The charge LED glows red while the monitor is
charging and glows green when charging is complete.
• For overnight monitoring, it is recommended to connect
the power adapter.
will stay on up to 3.5 hours in normal mode or 5 hours
in Scan Mode.
• Use Scan Mode to conserve battery power.
• The power LED blinks twice per second when the
battery is low.
• For better reception, pull up the antenna on the
monitor.
When fully charged, the monitor
Pull up to extend
antenna
9