Service And Repairs - Leister EXAMO 300F Instrucciones De Funcionamiento

Version Tensiometer
EXAMO 300F / EXAMO 300F with USB-Port
EXAMO 600F / EXAMO 600F with USB-Port
Maintenance
• Keep drive shaft (6) clean and grease after 40 hours of operation. When using under difficult environmental con-
ditions, the intervals have to be reduced.
• Keep guide bars (7) (8) clean.
• Friction bearings as well as shaft bearing are maintenance free. Lubrication with grease or oil (with grease addi-
tives such as Zinc Sulphide, Molybdenum Sulphide and similar) is not allowed as this would affect the working life
of the bearings.
• Damaged wiper devices on the sliding carriage (12) have to be replaced immediately.
• Check power supply cord and plug for any possible electrical or mechanical damages.

Service and Repairs

• The carbon brushes in the motor should be checked by your Service Centre after about 1000 hours of operation.
• Repairs have to be carried out by authorised LEISTER Service Centres only. They guarantee a specialized and
reliable repair service within 24 hours using original LEISTER spare parts.
Warranty
• For this tool, we generally provide a warranty of one (1) year from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will be corrected by replacement or repair.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded from the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
28