Important - Leister EXAMO 300F Instrucciones De Funcionamiento

USB port (optional) for tensiometers EXAMO 300F and 600F
• The USB port enables the process values force, expansion and test speed to be recorded on a standard USB
stick. The assessment is made using spreadsheet software, not included in the delivery, e.g. Microsoft
• Basic USB stick
– If a new USB stick is used, this should be formatted in format FAT 32 with memory size 512 bytes.
– IMPORTANT: Always test new USB sticks on the device in advance! Sometimes not all USB sticks work
with the device. This can depend on, e.g. USB copies, preinstalled software which wants to start up automatically,
locked stick, etc.
– Never pull out the USB stick while it is saving! The data will not be saved! Always end the test of a
sample according to these instructions.
• Date and time
– Set up or check the date and time the first time that the device is started up. You can find the instructions
for this under the heading Presettings (diagram).
– If the date has been altered, turn the device off for two seconds. Then turn it back on so that the date is
accepted.
– The date and time are powered by a battery independent of the power supply.
It is recommended to check its function periodically.
• Inserting USB stick
– Unscrew protective cover.
– Insert USB stick in the USB port.
– The symbol | (A) appears in the device display.
• File name
– A file name consisting of the current date (month and day) and the file number will be created automatically
when recording is started. Example: 0309-002 fi 09. March, second sample.
– The file number increases automatically every time it is saved. The number begins at 001 every day
A 5 0
5 0 I
A
® Excel.
0 0
0 0
23