Tabla de contenido
4
INSTALL THE ARMS.
B
1.5 Nm
D
A. Lower the arms onto the mast as shown.
B. Install the knob at the rear of the mast and tighten it to 1.5 Nm.
C. Insert the lock pin through the front of the mast.
D. Attach the lock to the lock pin and use the key to lock it.
1
OPEN THE EXO SWINGBASE™.
Loosen the large knob, then pull the pin and
swing the unit open until the pin engages
and locks the gate into the open position.
Instruction #1036039A - page 3 of 10
A
OPERATION
CAUTION: Keep your fingers away from ALL moving parts!
C
NOTE: If you choose
not to use the hitch
lock, install the
bridge pin in its place.
Tabla de contenido
