Safety Instructions - iSi THERMO XPRESS WHIP Modo De Empleo

English

Safety instructions

▪ Never apply force.
▪
Follow the safety regulations on the charger packaging.
▪ Protect the chargers from direct sunlight and heat above 50 °C/120 °F.
▪ Store product components and chargers out of the reach of children.
▪ Only operate the device when it's filled.
▪ Only use the device for the purposes specified in this instruction manual.
▪ Cryogenic applications (with liquid nitrogen, for example) are not recommended.
▪ Only ever combine device heads and bottles of the same device type.
▪ Never combine parts of the iSi Thermo XPress Whip with parts produced by other manufacturers.
▪ Never attach the device head so that it is crooked.
▪ Never lean your body over the device when screwing in the charger.
▪ Never unscrew the device head from a pressurized device.
▪ Do not reach into the sharp edges of the decorator tip. Risk of injury!
▪ Never use the nozzle adapter as a carrying handle.
▪ Never heat up the iSi Thermo XPress Whip.
▪ Never store a filled device in the freezer or deep freezer compartment.
▪
T he device is a pressure vessel. Dropping and/or damage turn it into a source of hazard and it may not
be used again. Have the device checked by the iSi service center.
▪
Only disassemble the iSi Thermo XPress Whip in accordance with "Thorough cleaning", page 30. ▪ Check the material compatibility of any cleaning/disinfectant solution that is used.
▪
Do not carry out any alterations to the iSi Thermo XPress Whip. This will invalidate the warranty and lead
to exclusion of liability.
▪ Read the instruction manual thoroughly and store it in a safe place to avoid operating errors.
19