Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7. OPERATION
Step 1. Turn on the power of both the WD-4800 and connected tuners (the power lamp lights).
Step 2. Set the wireless microphone switch to the ON position.
8. RACK MOUNTING
Use an optional MB-15B bracket when mounting the unit in an equipment rack.
Step 1. Remove rubber feet on the unit's bottom surface.
Step 2. Using the screws supplied with the MB-15B, mount the MB-15B to the unit's sides.
Step 3. Using other screws also supplied with the MB-15B, mount the unit in the rack.
9. SPECIFICATIONS
Power Source
Current Consumption
Frequency Range
Distribution Channel
Antenna Input
Antenna Output
DC Power Supply
Indicator
Operating Temperature
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
DC cable ............................................................ 4
• Optional Product
Rack mounting bracket MB-15B
4
AC mains (120 V/230 V selectable)
0.25 A (120 V AC)/0.15 A (230 V AC)
VHF/UHF
2 channels
2 inputs (front x 1, rear x 1), 75 Ω, BNC (phantom powering of 9 V DC/25 mA for antenna)
4 outputs, 75 Ω, BNC
4 outputs (Each output: 13 V DC/250 mA)
Power lamp
–10 to +50°C
Front panel: Al coating, black
Case:
Pre-coated steel plate, black
420 (w) x 44 (h) x 305.5 (d) mm
3.55 kg
Mounting bracket MB-15B (optional)
3 x 14 screw (supplied with MB-15B)
Rack
M5 fiber washer (supplied with MB-15B)
M5 x 12 screw (supplied with MB-15B)
Tabla de contenido
