Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified may result in
fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power cord in close
proximity to heaters, and never place heavy objects -- including the unit itself -- on the power cord, as doing so may
result in fire or electric shock.
• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface. Doing so may
result in the unit falling down and causing personal injury and/or property damage.
• To prevent lightning strikes, install the unit at least five meters away from a lightning rod, and yet within the protective
range (angle of 45°) of the lightning conductor. Lightning strikes may cause a fire, electric shock or personal injury.
• Since the unit is designed for in-door use, do not install it outdoors. If installed outdoors, the aging of parts causes the
unit to fall off, resulting in personal injury. Also, when it gets wet with rain, there is a danger of electric shock.
• Should the following irregularity be found during use, immediately switch off the power, disconnect the power supply plug
from the AC outlet and contact your nearest TOA dealer. Make no further attempt to operate the unit in this condition as
this may cause fire or electric shock.
· If you detect smoke or a strange smell coming from the unit.
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged (exposure of the core, disconnection, etc.)
• To prevent a fire or electric shock, never open nor remove the unit case to modify the unit. Refer all servicing to your
nearest TOA dealer.
• Do not place cups, bowls, or other containers of liquid or metallic objects on top of the unit. If they accidentally spill into
the unit, this may cause a fire or electric shock.
• Do not touch a plug or antenna during thunder and lightning, as this may result in electric shock.
CAUTION
• Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock.
• When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord itself. Operating
the unit with a damaged power supply cord may cause a fire or electric shock.
• The socket outlet shall be installed near the equipment and shall be easily accessible.
• When moving the unit, be sure to remove its power supply cord from the wall outlet. Moving the unit with the power cord
connected to the outlet may cause damage to the power cord, resulting in fire or electric shock. When removing the
power cord, be sure to hold its plug to pull.
• Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the heaters, or in
locations generating sooty smoke or steam as doing otherwise may result in fire or electric shock.
• Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury and/or
property damage. In addition, the object itself may fall off and cause injury and/or damage.
• If dust accumulates on the power supply plug or in the wall AC outlet, a fire may result. Clean it periodically. In addition,
insert the plug in the wall outlet securely.
• Switch off the power, and unplug the power supply plug from the AC outlet for safety purposes when cleaning or leaving
the unit unused for 10 days or more. A fire or electric shock may result.
3. GENERAL DESCRIPTION
The TOA Wireless Antenna Distributor WD-4800 is designed to be used in conjunction with a VHF/UHF band system for
sound reinforcement applications. It comes with two channels, in which two input signals are mixed and distributed to four
outputs. The WD-4800 also has four DC power distribution outputs.
4. HANDLING PRECAUTIONS
• When installing, keep the unit, receiving antennas, and antenna cables as far away as possible from fluorescent lamps,
digital equipment, personal computers, and other equipment which generate high frequency noise.
• Avoid installing the receiving antennas in close proximity to metal objects, such as iron frames and lockers. Keep the
antennas at least 30 cm away from the wall surface.
• Keep two antennas at least 3 m away from each other to obtain the optimum diversity effect, although this distance
differs depending on the construction and size of the room where they are installed.
• When cleaning the case, use a dry cloth. Never use benzine, thinner or other volatile liquids.
2
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
Tabla de contenido
