Kohler K-922 Guia De Instalacion página 11

Apply Sealant
Stud
Setscrews
7. Install the Drip Tray
- Check to make sure that the studs are positioned and tightened
correctly.
- Apply a bead of silicone caulk sealant around the base of each drip
tray mounting stud.
- Slide the drip tray onto the mounting stud until it is flush to the
finished wall and tighten the two setscrews.
Install Drip Tray Screen
- To install the screen in the drip tray, locate the notch on the bottom
edge of the screen. Align the notched end of the screen to the front
edge of the block. Gently press the screen until it fits into the groove
in the sides of the drip tray.
Kohler Co.
Drip
Tray
11
Notch
E
1006741-2-