Emc Tables - I-Tech MAG2000 PREMIUM Manual De Empleo

EMC Tables

Emission test
RF emissions
Cispr 11
RF emissions
Cispr 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
MAG 2000 is intended for use in the electromagnetic environment specified below. The
customer or the user of MAG 2000 should assure that is used in such environment.
Immunity test
Electrostatic
discharge (ESD)
EN 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Impulses
EN 61000-4-5
I.A.C.E.R. Srl
Electromagnetic emission
Compliance
Group 1
Class B
Class A
Complies
Complies
Electromagnetic immunity
Test level EN
60601-1-2
± 6kV contact
± 8kV air
± 2kV for power
supply lines
±1kV
differential
mode
Electromagnetic environment –
guidance
MAG 2000 uses RF energy only for its
internal function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment
MAG 2000 is suitable for use in all
establishments,
establishments
connected to the public low-voltage
power supply
buildings used for domestic purposes.
The MAG 2000 is suitable for use in all
establishments, other than domestic
establishments
connected to the public low voltage
power supply network that supplies
buildings used for domestic purposes
Compliance level
± 6kV contact
± 8kV air
± 2kV per power
supply lines
±1kV
differential
mode
27
including domestic
and those directly
network that supplies
and those directly
Electromagnetic
environment –
guidance
Floors should be
wood, concrete or
ceramic tile. If floor
are covered with
synthetic material,
the relative humidity
should be at least
30%
Mains power quality
should be at that of
a typical commercial
or hospital
environment.
Mains power quality
should be at that of
a typical commercial
or hospital
environment.
MNPG58-05