Cleaning And Maintenance - Probuilder 11855 Manual De Instrucciones

Use
The hoist can lift/winch loads using single
or double cable. Lifting capacity is doubled
using double cable.
When stopping the hoist during
lowering, the item can drop a couple of
centimetres more due to inertia. This is
normal.
The stop block above the hook (4) will
prevent the hook being wound into the
drum and getting stuck.
Winching/lifting with single cable
Roll as much cable off the drum to
allow the hook to reach the item using
the hoist/lower button on the remote
control (10).
Attach hook securely to the item.
Rewind the cable using the hoist/lower
button until the item is at the desired
height/position.
When the hoist/lower button
is released, the hoist will stop
immediately.
Winching/lifting with double cable
Roll approx. a meter of cable off the
drum and fi t the pulley (4) onto the
cable. Secure the hook onto the hoist
housing.
Roll as much cable off the drum to
allow the hook to reach the item using
the hoist/lower button on the remote
control.
Lift the item as described above.
20

Cleaning and maintenance

Wipe off with a damp cloth. Lubricate
moving parts with oil.
Check regularly that the cable is in good
condition.
Check regularly that all bolts, brackets and
nuts are tight.