Recording Of Failures; Appendix; Compulsory Inspection Of Tachographs; Maintenance And Cleaning - Siemens VDO MTCO 1324 Instrucciones De Servicio

Recording of failures

Power loss
In case there is power available again, the
tachograph will draw a line (1) on the chart
shortly after the vehicle has started to move.
Pulse generator disconnection
Failure of the transmission link between pulse
generator Ø MTCO 1324:
• As soon as the vehicle stands still, the
marker (2) is shown; during ride, v-record-
ing continues.
or

Appendix

Compulsory inspection of
tachographs
The vehicle owner is obliged to have the
installed Kienzle MTCO 1324 inspected at
regular intervals.
At least once every two years, the proper op-
eration of the tachograph has to be tested,
e.g. in conjunction with the technical
inspection of your vehicle.
Please ensure that the installation plate is
replaced at each inspection and contains the
information required.
© Siemens VDO Automotive AG
(Page 151, figure VIII)
• The marker (3) is displayed immediately
after the failure and remains there,
until the cause of the failure has been
remedied.
Device failures
Failures in the recording mechanism may
cause the following recording errors:
• Marker (4), defect within the v-recording
mechanism.
• Marker (5) and (6), defect within the
recording mechanism for the time group
and distance record.

Maintenance and cleaning

The Kienzle MTCO 1324 is equipped with
modern, maintenance-free technology. For
this reason, preventive maintenance work is
not required.
In case they are dirty, you may clean the
housing, the display and the function keys by
means of a slightly moistened cloth. In case
this proves not sufficient, special cleaning or
preservative agents for plastics may also be
used.
39