in the correct position.
as far as it will go.
insert the metal pin as far as it will go (photo
Push the lid guide through the lid arm hole and screw
the cone into the top of the guide (photo
lid onto the guide and turn it so that the dimples are
beneath the lid arm (photo
).
3
1
2
securing the locking hook
to the edge of the bowl
and pushing the handle
down.
for operation.
should be on.
W A R N I N G
There is a green status indicator light on the
control panel of the motor unit. If this green
light does not come on, consult the relevant
paragraph. A flashing green light means that
the conditions for the operation have not all
been met. Check that the bowl, lid arm and lid
are all correctly positioned. As soon as the light
stops flashing and stays on, you can use your
machine.
BLADE (see diagram, page 12)
8 is supplied with a fine-serrated 2-blade
®
).
1
2
10, 15 and 20 models are supplied with a
®
3
USES
AND EXAMPLES
HOSPITAL USES
SPOON FEEDING
SEMI-LIQUID FEEDING
LIQUID FEEDING (for use via tubes)
DELICATESSEN USES
Butter mixtures
Sauces
Vegetable mousses.
Grinding: lobster, scampi, seashells...
PHARMACEUTICAL AND CHEMICAL
LABORATORY USES
Grinding: herbs, seeds, powders, tablets....
Mixing
or switching from uncooked foods to cooked foods
detergents and disinfectant.
HYGIENE
7