Safety Instructions; Work Area Environment - Dustcontrol DC 1800 TR EX Traducción Del Manual De Instrucciones De Servicio Original

Safety instructions

Read the following safety instructions Before operating the machine. Keep the User Guide. Failure to comply with the safety
instructions voids the warranty and may result in personal injury and damage to the machine. Dustcontrol is not responsible for
damage to the equipment caused by improper installation or improper operation of the equipment.
The machine must only be used in Zone 22, area where an explosive atmosphere is not expected to occur during normal
operation, but if it does occur, it will only be for a short period. The machine must only be used by qualified personnel who have
knowledge in accordance with Directive 1999/92/EC.
Warning
This machine is intended for professional use.
Only use accessories and replacement parts included in the Dustcontrol product line.
WARNING
No hot or glowing particles may be sucked by the machine. The machine must not be used for explosive
materials, unstable or self-igniting substances or dusts with a minimum ignition energy of < 3 mJ.
WARNING
Before use, you must receive training as well as information and instructions on how to handle the dust
extractor and the dust to be extracted.
WARNING
Use the machine for its intended purpose. Follow the instructions for the material to be extracted.
WARNING
When using electrical devices, basic safety instructions must be followed to reduce the risk of fire, electric
shock or personal injury.
WARNING
This machine is only intended for extraction of dry material.
WARNING
If incorrect or non-OEM parts are used (especially filters, hoses and plastic bags), the machine can leak
hazardous dust which may result in personal injury.
WARNING
The handle on the top side of the machine may only be used with hand power and empty container. The
machine is designed for a maximum total weight of 40 kg. Higher loads may cause damage.
WARNING
The feed (hose) must be anti-static or grounded.
CAUTION
The machine must only be used if all filters are intact and fitted properly.

Work area environment

Do not expose the machine to moisture. Do not use it in damp or wet areas or close to flammable liquids or gases.
DC 1800/2800/3800, Art.nr. 94170-C 13