Trouble Shooting - Dustcontrol DC 1800 EX Manual Original

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34

TROUBLE SHOOTING

Problem
Motor will not start.
The motor stops directly after
starting.
Fan runs but no suction.
Fan runs but poor suction.
Machine blows dust.
Abnormal sound from
machine.
2013-11-21
Fault
Machine not connected.
Is the operating temperature of
55 ° C, the overload protection
is turned o .
Incorrect fuse.
Is the operating temperature of
55 ° C, the overload protection
is turned o .
Hose not connected.
Hose plugged.
The container is not installed
properly.
Hole in the hose.
Plugged lter.
Hose too long or too small.
Hose is kinked.
Machine top is mounted incor-
rectly.
Dust is packed in the cyclone.
Filter is perforated or has come
loose.
DC 1800/2800 EX - 18
Solution
Make sure connection.
Order service.
Change to correct circuit.
Order service.
Connect the hose.
Remove block.
Install container.
Change or repair hose.
Clean or change lter.
Change the hose.
Check and free.
Adjust the mounting.
Take o the top and clean out.
Check the lters and change if
necessary.
Order service.
Part No 94169
Tabla de contenido
loading

Este manual también es adecuado para:

Dc 2800 ex

Tabla de contenido