Safety Precautions; General Safety Guidelines; Electrical Shock Hazard - HP Latex Cutter Serie Información De Introducción

HP shall not be liable for technical or editorial errors or omissions contained herein.
You can download the expressly provided HP Limited Warranty and Legal Information applicable to your product
from http://www.hp.com/go/latex115printandcut/manuals, http://www.hp.com/go/latex315printandcut/manuals,
or http://www.hp.com/go/latex335printandcut/manuals. For some countries or regions a printed HP Limited
Warranty is provided in the box. In countries or regions where the warranty is not provided in printed format, you
may request a printed copy from http://www.hp.com/go/orderdocuments.

Safety precautions

Before using the HP Latex Print and Cut Solution, read the following safety precautions and operating instructions to
make sure you use it safely.

General safety guidelines

There are no operator-serviceable parts inside the cutter except those covered by HP's Customer Self Repair
program: see http://www.hp.com/go/selfrepair/. Refer servicing of other parts to qualified service personnel.
This equipment is not suitable for use in locations where children are likely to be present.
Turn off the cutter and call your service representative in any of the following cases:
The power cord or plug is damaged.
●
The cutter has been damaged by an impact.
●
There is any mechanical or enclosure damage.
●
Liquid has entered the cutter.
●
There is smoke or an unusual smell coming from the cutter.
●
The cutter has been dropped.
●
The cutter is not operating normally.
●
Turn off the cutter in either of the following cases:
During a thunderstorm
●
During a power failure
●
Ventilation measures for your location, whether office, copy room, or printer room, should meet local environmental
health and safety (EHS) guidelines and regulations.
Take special care with zones marked with warning labels.

Electrical shock hazard

The internal circuits of built-in power supplies and power inlet operate at hazardous voltages capable of
WARNING!
causing death or serious personal injury.
The cutter uses one power cord. Unplug the power cord before servicing the cutter.
To avoid the risk of electric shock:
The cutter must be connected to earthed mains outlets only.
●
Do not remove or open any other closed system covers or plugs.
●
Do not insert objects through slots in the cutter.
●
Take care not trip over the cables when walking behind the cutter.
●
2 ENWW