User Guide × 1 - DJI 2600W Guia Del Usuario

the battery charger or charging batteries may be damaged by excessive heating and may even
lead to a fire hazard.
14. Keep the battery charger away from inflammable materials while charging. DO NOT place the
battery charger or charging batteries on a blanket or any carpeted surfaces when in use.
15. For activation or firmware updates, the battery charger must be connected to the remote
controller of the MG-1P, T16, or T20. Make sure the remote controller has been updated to the
latest version before activating or updating the battery charger.
16. To ensure the battery's performance and prolong the battery's service life, in quick charge
mode, the battery will not be charged to a power level of 100%. Switch to slow charge mode if
you want to charge the battery to 100%.
In the Box
2600W 4-Channel
Intelligent Battery Charger *
* This 2600W 4-Channel Intelligent Battery Charger is available in two versions. One version is compatible
with T16/T20 batteries and one version is compatible with MG-12000P batteries. The version compatible
with T16/T20 batteries has an adapter at the end of the charging cable, while the version compatible
with MG-12000P batteries does not. The general descriptions in this manual apply to both versions. The
illustrations in this manual may vary from the actual product.
To make sure the battery charger is working normally, please purchase an official DJI AC cable
depending on the plug type of your region.
Introduction
Featuring the functionality of a battery charger and charging hub, the 2600W 4-Channel Intelligent
Battery Charger can connect with up to four batteries. The max output power of the battery charger
is 2600 watts and users can choose between two different charging modes: quick charge and slow
charge. While charging, the battery charger monitors the batteries' status and can automatically
adjust the charging current if required. The battery charger continues to charge even if the ventilation
holes are blocked.
Users can check the battery charging status LEDs and the warning indicator on the operation panel
of the battery charger to confirm if there are any errors. The battery charger can be connected to
a remote controller, and users can launch the DJI MG app or DJI Agras app to see more detailed
information regarding any errors. Additionally, the battery charger has the following functions:
overcurrent protection, overcharging protection, overheating protection, and status display.
×1 GND Cable
User Guide × 1
After-sales Service Card × 1
Product Information Card × 1
©
2019 DJI All Rights Reserved.
×1
3