Cochlear Baha Cordelle II Manual Del Usuario página 5

English
On/Off and Volume control
Off
When the volume control is in the 0 position it is off. You will feel a
►
"click" as it goes into off mode.
On For the sound processor to be on, the volume control must be set to a
►
position higher than 0. You will feel a click as the sound processor moves from
off mode to on mode.
Volume control
volume increases, and if you turn it away from the M/T switch it will decrease.
Tone switch
The tone switch controls the frequency response. The switch can be set in
three different positions.
N = Normal. This gives the widest frequency response.
H = High frequency emphasis. This setting reduces low frequency sounds,
which often can improve speech understanding.
L = Low frequency emphasis. This position is often useful during the first
period after fitting as it allows you to gradually get used to high frequency
sounds you have not heard in a long time.
The tone switch is effective for all inputs (microphone, telecoil and
accessories connected via the direct audio input).
8
If you turn the volume control towards the M/T switch the
►
Program switch
The body worn unit is equipped with a program switch for the telecoil function.
The telecoil improves sound quality and speech understanding when using
telephones in homes where there are personal loop systems installed and in
other buildings with loop facilities.
There are three programs available. "M" is for listening with the microphone
only. In program "M/T" both the microphone and telecoil are active. In program
"T" only the telecoil is active.
Trim controls
There are two trim controls on the back of the body worn unit. These are to
be adjusted by audiologists only. When fitting the Cordelle, the audiologist will
set these trimmers to suit your needs.
English
9