Licensing Information - Shure UA844 Guía Del Usario

Specifications
Power Requirements
14 to 18 V DC
DC Output
14 to 18 V DC (x4)
Output Current
Combined total from all DC outputs
2.5 A, maximum
Operating Temperature Range
-18°C (0°F) to 63°C (145°F)
Dimensions
45 x 483 x 172 mm (H x W x D)
Net Weight
1.62 kg (3.6 lbs)
RF Input
Connector Type
BNC
RF Frequency Range
model dependent
174 to 1805 MHz
Bias Voltage
15 V DC (150 mA, maximum) (x2)
Impedance
50 Ω
Certifications
The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit
www.shure.com
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: [email protected]
Important Product Information

LICENSING INFORMATION

Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.
Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless
microphone equipment is the user's responsibility, and licensability depends on the user's classification and application, and on the selected frequency.
Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering
frequencies.
NOTE: This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable
of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies
and RF power levels for wireless microphone products.
RF Output
RF Frequency Range
model dependent
174 to 1805 MHz
Output Intercept Point
21 dBm, typical
Connector Type
BNC
Impedance
50 Ω
Output Connector Isolation
30 dB, typical
Gain
Input to any output port (Unused ports terminated in 50 Ω)
-1 to +1 dB
12