Specifications And Features; Compatible Wireless Devices - Tyco DSC PowerSeries Neo HSM2HOST Guia De Instalacion

Specifications and Features

• Current Draw: 60mA
• Voltage: Draws current from the PowerSeries Neo alarm controller (10.8VDC to 12.5VDC)
• Frequency: 433MHz (HSM2HOST4), 868MHz (HSM2HOST8), 912-919MHz
UL
(HSM2HOST9
• Zones - can receive signals from up to 128 wireless zones, plus 16 wireless keypads. Also supports
up to 32 wireless keys
• Supervisory - programmable supervisory window
• Can be wired up to 1000 ft. / 230 m from the main panel with 22 AWG wire
• Connects to Corbus
• Compatibility: The HSM2HOST is used with PowerSeries Neo alarm panels
• Operating temperature: 0°C to +49°C (32-122°F)
• Relative humidity: 93% non-condensing
• Separate, built-in wall and case tampers
NOTE: For Commercial BURG (UL) the Supervisory window shall be set to 4 hours.
For Residential Fire (UL/ULC) the Supervisory window shall be set to 200 seconds.
For Residential BURG (UL/ULC) the supervisory window shall be set to 24 hours.
For UL Home Healthcare applications the supervisory window shall be set to 24 hours
Only models operating in the band 912-919 MHz are UL/ULC listed where indicated. Only UL
approved devices are to be used with UL/ULC listed systems.

Compatible Wireless Devices

Please refer to the instruction sheets of the following devices for more information. On the chart
below and throughout this document, x in the model number represents the operating frequency of the
device as follows: 9 (912-919 MHz), 8 (868MHz), 4 (433MHz).
The HSM2HOSTx (x= 4/8/9) can receive signals from the following devices:
PowerSeries Neo alarm Controllers
Wireless keypads
Wireless PG smoke detector
Wireless PG smoke and heat detector
Wireless PG CO detector
Wireless PG PIR motion detector
Wireless PG PIR + camera motion detector
)
Alarm Controllers
HS2128
HS2064
HS2032
HS2016
Modules
HS2LCDWFx
HS2LCDWFPx
HS2LCDWFPVx
Wireless Devices
PGx926
PGx916
PGx913
PGx904(P)
PGx934(P)
1
UL
UL
UL
UL