Leister FUSION 2 Manual Del Usuario página 16

Accessoires
• Only Leister accessories must be used.
Maintenance
• In case of soiling clean the air inlet (15) on the hot air blower with a brush.
• Clean the extruder nozzle (19) each time the welding shoe is replaced and remove
any welding deposits (see page 15).
• Check power supply cord and plug for electrical and mechanical damage.
• Regularly clean the air hose (16).
Service and Repairs
• Have the state of the carbon brushes of the drive and hot air blower checked
by your service centre after ca. 250 hours of operation. The drive and the hot
air blower switch off automatically once the minimum carbon length has been
reached.
Operating time; Drive ca. 300 hours (brushes)
• Repairs should only be carried out by authorized Leister Service Centres. They
guarantee a specialised and reliable Repair Service within 24 hours using original
spare parts in accordance with the circuit diagram and spare parts list.
Warranty
• For this tool, we generally provide a warranty of one (1) year from the date of
purchase (verified by invoice or delivery document). Damage that has occurred
will be corrected by replacement or repair. Heating elements are excluded from
this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded
from the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by
the purchaser.
Technical data and specifications are subject to change without prior notice.
16
Hot air blowers ca. 1000 hours (brushes)